Precision PCB Fabrication, High Frequency PCB, High Speed PCB, Standard PCB, Multilayer PCB and PCB Assembly.
The most reliable PCB custom service factory.
PCBA Tech
Understand the CIMS and distribution of SMT
PCBA Tech
Understand the CIMS and distribution of SMT

Understand the CIMS and distribution of SMT

2021-11-10
View:34
Author:Will

The introduction of the computer integrated manufacturing system cims into the SMT patch processing and production has improved the product quality and the effective utilization of equipment, and greatly shortened the PCB product design cycle and the time to market. The economic benefits brought by cims to enterprises are obvious. It is believed that the application of cims in SMT patch processing and production will become more and more extensive in the near future.

The application of   cims in SMT chip processing and production

   Many of the equipment in the SMT patch processing production line are computer-controlled automated processing equipment, which provides a complete possibility for computer-aided manufacturing to form a cad/cam integrated system.

pcb board

The design department of modern electronic manufacturing companies almost all use cad software for circuit design, and the manufacturing department also uses a large number of automated equipment such as placement machines, DIP plug-in processing plug-in machines, etc. for production, but these two departments rarely understand each other's needs, and many are useful Information cannot be shared, and two "automated" islands are often formed between enterprises. With the intensification of market competition, customers require shorter product delivery cycles and control of production costs. There is an urgent need to establish a connection between these two islands in order to shorten production preparation time, strengthen defect analysis before production, and reduce products Rework. The only way to connect the information flow in the "automation islands" of the CAD design system and production automation, and to remove the "partition wall" between PCB product design and product manufacturing, is through the computer integrated manufacturing system (computer integrated manufacturing system, referred to as cims) to fulfill.

      Process CAD design files, improve the assembly accuracy, and greatly reduce the failure rate.

  Its connotation is to integrate various manufacturing-related technical systems in the enterprise with the help of computers, thereby improving the ability of the enterprise to adapt to market competition. However, the system cims based on the CIM concept only began to gain attention and be implemented on a large scale in the mid-1980s. Cims is based on the database, and transfers the data in the design environment to various automated processing equipment through the computer network, and can effectively control and supervise these automated equipment. Use cims to establish the connection between the production department and the design department, which can be achieved through the integration of the cad/cam system. As mentioned earlier, many equipment in the SMT patch processing production line are computer-controlled automated processing equipment, which provides a complete possibility for computer-aided manufacturing to form a cad/cam integrated system. In fact, most of the data required for programming of processing equipment in the smt patch production line can be obtained from the relevant data files of the cad system. For example, the coordinate position, angle, physical characteristic parameter, electrical parameter, etc. of the component on the pcba. The amount of PCB data is very large, and some characteristic data are required by different processing equipment. Such as PCB placement machines, glue dispensers, and online testing equipment all require the coordinate position of the component on the pcb. Therefore, use the philosophy and technology of CIMS to establish a cad/cam integrated system between cad and cam, and directly extract, organize/transform and optimize the corresponding characteristic data from the data file of the cad system, and program the data format requirements according to the specific equipment Or the format of the n/c instruction is required to be transmitted to the control computer of the processing equipment through the computer network and interface communication software for direct call or direct drive of the numerical control processing equipment during programming. This not only saves data preparation and programming time, but also because of the direct

   Due to the characteristics of the production of the smt industry, it is more appropriate to use jit for on-site management. The combination of jit and tqc can reduce waste and improve product quality.