Precision PCB Fabrication, High-Frequency PCB, High-Speed PCB, Standard PCB, Multilayer PCB and PCB Assembly.
The most reliable PCB & PCBA custom service factory.
High frequency PCB

RT/duroid 5880 High Frequency PCB

High frequency PCB

RT/duroid 5880 High Frequency PCB

RT/duroid 5880 High Frequency PCB

Model : RT/duroid 5880 High Frequency Board

Material : Rogers RT/duroid 5880
L a y e r : 2Layres
    DK    : 2.2

Finished Thickness  : 1.65mm

Dielectric Thickness : 1.548mm
Thermal Conductivity  : 0.2w/m.k
Volume Resistivity : 2*107
Surface Resistivity : 2*107
Surface Treatment : Immersion Silver
Copper Thickness : Base 0.5OZ,Finished 1OZ
Application:Antenna, Communications Radar

Product Details Data Sheet

RT / Duroid 5880 high frequency PCB is a PTFE glass fiber reinforced material. These microfibers are randomly distributed within the material, providing maximum strength enhancement for circuit application and circuit production processes.


Real Project display:

RT/duroid 5870 and rogers 5880 glass microfiber reinforced PTFE composites are designed for exacting stripline and microstrip circuit applications.

RT5880 Advatage:

  1. Very low DK, measured at 10GHz, the DK is 2.20±0.02;

  2. Extremely low DF, measured at 10GHz, dielectric loss factor is 0.0009;


Application field

Commercial aviation telephone circuit
Microstrip and strip circuits
Millimeter wave applications
Military radar system
Missile guidance system
Point-to-point digital radio antennas

Rogers  rt5880 Technical Specifications

Rogers RT5880 Technical Specifications


For more technical information about rogers rt5880, please visit: Rogers rt5880 Technical Specifications


RF/Microwave PCB application

PCB printed circuit boards with radio frequency(RF PCBs) are an increasingly used technique within the PCB industry.

--RF PCB with a high frequency with works above 100 MHz.

--Microwave PCB with works above 2 GHz radio frequency.

RF-pcb’s are used in different applications such as remote controls(wireless controls)security,smartphones,sensors etc.

New technologies make more and more use of these RF applications.

This asks for a manufacturing according to high quality standards and choosing the right RF materials depending on the application.

It is important that one knows the properties of the various materials. Choosing the right rogers 5880 material is perhaps the most critical decision in the production process of the RF PCB.

Model : RT/duroid 5880 High Frequency Board

Material : Rogers RT/duroid 5880
L a y e r : 2Layres
    DK    : 2.2

Finished Thickness  : 1.65mm

Dielectric Thickness : 1.548mm
Thermal Conductivity  : 0.2w/m.k
Volume Resistivity : 2*107
Surface Resistivity : 2*107
Surface Treatment : Immersion Silver
Copper Thickness : Base 0.5OZ,Finished 1OZ
Application:Antenna, Communications Radar


For PCB technical problems, iPCB knowledgeable support team is here to help you with every step. You can also request PCB quotation here. Please contact E-mail sales@ipcb.com

We will respond very quickly.