Rogers RO4350B Radio Frequency PCB(RFPCB)

Rogers RO4350B is the most popular Radio Frequency PCB material.

Rogers RO4350B is a hydrocarbon / ceramic laminate with a dielectric constant of 3.48. It meets the requirements of commercial equipment manufacturers for Printed Circuit Boards.

RO4350B is a patented hydrocarbon resin system / ceramic filler reinforced by woven glass cloth. Its electrical properties are very close to PTFE / woven glass cloth material, and its machinability is similar to that of epoxy resin / glass cloth material.

RO4350B can use the standard epoxy / glass cloth processing technology, while providing strictly controlled permittivity and loss at a fraction of the price of traditional microwave materials. There is no need for special through-hole pretreatment or operation procedures like PTFE based microwave materials.

It has the following advantages:

1. Low RF loss

2. Low dielectric constant fluctuation with temperature

3. Low z-axis thermal expansion coefficient

4. Coefficient of expansion in low plate

5. Low permittivity tolerance

6. Stable electrical characteristics at different frequencies

7. Easy to mass production and multi-layer mixing of FR4, with high cost performance

Typical applications

Cellular base station antenna and power amplifier, Microwave point to point connection (P2P), Automotive radar and sensors, Radio frequency identification (RFID) tags,LNB for live satellite

For more technical information about RO4350B, please visit: rogers RO4350B data sheet

rogers ro4350b data sheet

Company introduction

iPCB Circuits Limited(iPCB.com) specialized with the RF PCB manufacturer for more than 17 years in China. We know how much the proper RF material would affect to the performance of the PCB board. The parameters such as RF microwave energy levels,operating frequency, operating temperature range,current and voltage are of great importance when choosing the suitable material for the high frequency PCB fabricating. Getting familiar with those RF PCB material is one of our job,Check below material listing for refer. We have enough of them in stock to ensure the fast delivery.

RF/Microwave PCB material:

Rogers RO4350B / RO3003 / RO4003 / RO3006 / RT/Duroid 5880 / RT5870 and etc.

Arlon / Isola / Taconic / PTFE F4BM / Teflon material also shouldn’t be forgotten.

Hybrid PCB material (Mixed dielectric / Laminate)

Rogers RO4350B + FR4 / RO4350B + IT180 / RO4003C + FR4 / RO3010 + FR4 / RO3003 + FR4 / RO3010 + FR4 etc.

Radio Frequency (RF) microwave PCB application

RF Microwaves PCBs (printed circuit board) are used in various of fields, Such as Consumer Electronics / Military/Space / High power / Medical / Automotive / Industrial ect.

Surface finishing: OSP / ENIG / HASL LF / Plated gold / flash gold / Immersion Tin / Immersion silver / Electrolytic gold

Capacity: Golden finger / Heavy copper / Blind buried via / impendance control / filled with resion / carbon ink / backdrill / countersink / depth drilling / half plated hole / pressfit hole / peelable blue mask / peelable solderstop / thick copper / oversize

Application: Consumer Electronics /Space / Antenna & Communications System / High Power / Medical / Automotive / Industrial / Handheld device cellular / Wifi Antenna / Telematics and infotainment / Wifi/Computing/Radar/Power Amplifiers

Material: Rogers RO4350B / RO3003 / RO4003 / RO3006 / RT/Duroid 5880 / RT5870 and Arlon / Isola / Taconic / PTFE F4BM / Teflon material etc.

Layer: 2L 4L 6L 8L 10L 12L 14L 16L 18L 20L 22L 24L 26L 28L 30L

Dielectric Constant (DK): 2.20 / 2.55 / 3.00 / 3.38 / 3.48 / 3.50 / 3.6 / 6.15 / 10.2