RO4350B PCB

RO4350B PCB is high frequency PCB, RO4350B is a Rogers company produced ro4350b dielectric constant is 3.48. The main material finished products are hydrocarbon/ceramic laminates.

RO4350B Advantages:

1. Low DF
2. Low DK fluctuates with temperature
3. Low Z axis thermal expansion coefficient
4. Low internal expansion coefficient
5. Low DK tolerance
6. Stable electrical characteristics at different frequencies
7. Easy for mass production and multi-layer mixing of FR4, high cost performance

Rogers 4350 PCB application: Cellular base station antenna and power amplifier, Microwave point to point connection (P2P), Automotive radar and sensors, Radio frequency identification (RFID) tags, LNB for live satellite.

Rogers 4350 dielectric constant: Er=3.48

Dimensions and thickness specifications of Rogers 4350 material

0.004”(0.101mm),0.066”(0.168mm),0.010”(0.254mm),0.0133”(0.338mm), 0.0166”(0.422mm),0.020”(0.508mm),0.030”(0.762mm),0.060”(1.524mm)

12”* 18”(305*457mm) 24”* 18”(610*457mm) 24”* 36”(610*915mm) 48”* 36”(1.224m*457mm)

The thickness of 0.004" is not applicable. The thickness of plate is greater 1/2 oz ( 17μm), 1 oz (35μm), 2 oz (70μm)

Rogers 4350 prepreg usually uses RO4450B, RO4450F

Click open RO4350B Datasheet

Rogers 4350 vs FR4

Single chip RF device greatly facilitates the application in the field of wireless communication in a certain range. A complete wireless communication link can be formed by using appropriate microcontroller and antenna combined with this transceiver. They can be integrated on a small PCB and applied to many fields, such as wireless digital audio, digital video data transmission system, wireless remote control and telemetry system, wireless data acquisition system, wireless network and wireless security system.

If the analog circuit (RF PCB) and the digital circuit (microcontroller PCB) work separately, they may work well, but once they are placed on the same PCB, they cannot work together with the same power supply. This is the difference between Rogers ro4350b and FR4.

Ro4350b developed by Rogers, an internationally famous advanced PCB material manufacturer, meets the stringent requirements of commercial equipment manufacturers for PCB and has strong market competitiveness. Ro4350b not only has good high-frequency performance, low RF loss and excellent electrical characteristics, but also has other characteristics such as low production cost of ro4350b PCB, multi-layer hybrid pressing of ro4350b and FR4, and has strong market competitiveness.

Ro4350b PCB is in the range of - 50 ~ 150 degrees, and the change of ro4350b dielectric constant is 4‰, which lays a solid foundation for the temperature characteristics of communication equipment.

Cost performance of ro4350b. R & D RF engineers hope that good electrical performance is good and stable; From the perspective of the company's products, the cheaper the things, the better. And now the miniaturization of communication equipment requires more and more RF circuits and digital circuits can not be designed without mixing. So the contradiction appeared. How should ro4350b and FR4 choose? Ro4350b is a high-frequency PCB material. Its high-frequency electrical characteristics are better than FR4, but its price is also higher than FR4.

It can be selected in this way. For the hybrid PCB of ro4350b and FR4, only the RF device part of the equipment needs to be placed on the side of ro4350b and the digital device part needs to be placed on the side of FR4. Ro4350b PCB stack-up is as follows:

Ro4350b PCB stack-up

Some key characteristics of ro4350b PCB are analyzed. From the above analysis, it can be seen that ro4350b PCB not only has good high-frequency performance, low RF loss and excellent electrical characteristics, but also has other excellent characteristics such as low PCB production cost and can be mixed with FR4 multilayer. It is a high cost-effective PCB RF material.

iPCB Company introduction

iPCB company specialized with the RF PCB manufacturing for more than 17 years in China. We know how much the proper RF material would affect to the performance of the board .The parameters such as RF microwave energy levels,operating frequency, operating temperature range,current and voltage are of great importance when choosing the suitable material for the high frequency PCB fabricating. Getting familiar with those RF PCB material is one of our job,Check below material listing for refer. We have enough of them in stock to ensure the fast delivery.

RF/Microwave PCB material

Rogers RO4350B / RO3003 / RO4003 / RO3006 / RT/Duroid 5880 / RT5870 and etc.

Arlon / Isola / Taconic / PTFE F4BM / Teflon material also shouldn’t be forgotten.

Hybrid PCB material (Mixed dielectric / Laminate)

Rogers RO4350B + FR4 / RO4350B + IT180 / RO4003C + FR4 / RO3010 + FR4 / RO3003 + FR4 / RO3010 + FR4 etc.

Radio Frequency (RF) microwave PCB application

RF Microwaves PCBs (printed circuit board) are used in various of fields, Such as Consumer Electronics / Military/Space / High power / Medical / Automotive / Industrial ect.

Surface finishing: OSP / ENIG / HASL LF / Plated gold / flash gold / Immersion Tin / Immersion silver / Electrolytic gold

Capacity: Golden finger / Heavy copper / Blind buried via / impendance control / filled with resion / carbon ink / backdrill / countersink / depth drilling / half plated hole / pressfit hole / peelable blue mask / peelable solderstop / thick copper / oversize

Material: Rogers RO4350B / RO3003 / RO4003 / RO3006 / RT/Duroid 5880 / RT5870 and Arlon / Isola / Taconic / PTFE F4BM / Teflon material etc.

Layer: 2L 4L 6L 8L 10L 12L 14L 16L 18L 20L 22L 24L 26L 28L 30L

Dielectric Constant (DK): 2.20 / 2.55 / 3.00 / 3.38 / 3.48 / 3.50 / 3.6 / 6.15 / 10.2

Application: Consumer Electronics / Military/Space / Antenna & Communications System / High Power / Medical / Automotive / Industrial / Handheld device cellular / Wifi Antenna / Telematics and infotainment / Wifi/Computing/Radar/Power Amplifiers

If you need RO4350B datasheet, RO4350B price or RO4350B PCB fabrication, please contact iPCB.