Precision PCB Fabrication, High-Frequency PCB, High-Speed PCB, Standard PCB, Multilayer PCB and PCB Assembly.
The most reliable PCB & PCBA custom service factory.
PCB Tech

PCB Tech - Shape and hole processing technology of double-sided FPC

PCB Tech

PCB Tech - Shape and hole processing technology of double-sided FPC

Shape and hole processing technology of double-sided FPC

2021-10-29
View:459
Author:Downs

Most of the processing of the hole and shape of the double-sided FPC is processed by punching. However, it is not the only method. Depending on the situation, various methods or combinations can be used for processing.

Most of the processing of the hole and shape of the double-sided FPC is processed by punching. However, it is not the only method. Depending on the situation, various methods or combinations can be used for processing. Recently, new processing technologies have been introduced with the demand for higher precision and diversification.

1. FPC shape and hole processing technology

At present, punching is the most used for batch processing of FPC, and small batches of FPC and FPC samples are mainly processed by CNC drilling and milling. These technologies are difficult to meet the future requirements for dimensional accuracy, especially position accuracy standards, and now new processing technologies are gradually being applied, such as laser etching, plasma etching, chemical etching and other technologies.

pcb board

These new shape processing technologies have very high position accuracy, especially the chemical etching method not only has high position accuracy, but also has high mass production efficiency and low process cost. However, these techniques are rarely used alone, and are generally used in combination with the punching method.

2. FPC guide hole

It is also called positioning hole. Generally, the processing of the hole is an independent process, but there must be a guide hole for positioning with the line pattern. The automated process uses a CCD camera to directly identify positioning marks for positioning, but this kind of equipment is expensive and has a limited scope of application, so it is generally not used. Now the most used method is to drill positioning holes based on the positioning marks on the copper foil of the flexible circuit board. Although this is not a new technology, it can significantly improve the accuracy and production efficiency. In order to improve the precision of punching, the positioning hole is processed by the punching method with high precision and less debris.

3. FPC punching

Punching is to use a pre-prepared special mold to perform hole and shape processing on a hydraulic press or crank press. Nowadays, there are many kinds of molds, and molds are sometimes used in other processes.

4. FPC milling processing

The processing time of milling processing is in seconds, which is very short and the cost is low. The production of molds is not only expensive but also requires a certain period of time. It is difficult to adapt to the trial production and design changes of urgent parts. If the numerical control data of the numerical control milling processing is provided together with the CAD data, the operation can be carried out immediately. The length of milling processing time of each workpiece directly affects the level of processing cost, and the processing cost is also high for long time, so integrated adjustment processing is suitable for products with high price and low quantity or short trial production time.