PCB Tech - Related PCB Technology Blog Posts page 1

2021-10-13

Halogen-free PCB board have low water absorption and meet the requirements of environmental protection, and other properties can also meet the quality requirements of PCB board.

2021-11-12

The printed circuit board connects electrical components in one place through careful wiring to form a fully functional ...

2022-07-27

Ceramic PCBs are also called ceramic substrates. They refer to the circuit boards with multiple layers of wired or metalized ceramic boards on one side

2022-06-05

Emerging technologies born with the advancement of the times have brought many challenges to printed circuit boards, including production material selection, process selection, and product management, product design simulation, reliability and test requirements, and thermal resistance issues.

2022-06-05

mSAP (Modified Semi-additive Process) - a very thin copper layer is first formed on the surface of the PCB material, and then the lines that do not need to be retained are covered with a coating, and the required lines are exposed and are added by electroplating. Then, after removing the coating, the thin copper layer that has not been thickened is removed by micro-etching, and finally the required circuit is formed.

2022-01-02

As the circuit design of PCB circuit board becomes more and more complex, the circuit density becomes higher and higher, and the control is difficult, which can not meet the requirements of high-grade board.

2021-12-31

PCB quality problems during PCB manufacturing mainly include the following points, Various soldering problems, Adhesive strength problem, Excessive size change problem.

2021-12-27

Radio frequency, high-speed printed circuit boards​ digital circuit: Prohibit acute angles, try to avoid right angles.

2021-12-26

PCB purchasers have always been confused about the color of PCB, do not know what color of PCB board is the best quality.

2021-12-26

There are mainly physical methods for recycling waste PCB Chemical and biological methods. Physical method mainly includes mechanical crushing Air separation, magnetic adsorption and other technologies

2021-12-26

In PCB manufacturing technology, although the key is the PCB copper deposition process. The main function of PCB copper deposition is to make the NPTH of 2 layer PCB and multi-layer PCB circuit board.

2021-12-26

Cause analysis of NG in Multilayer PCB manufacturing process, Another easy problem in the processing of Multilayer PCB is the oxidation of the board surface.

2021-12-26

With the continuous development of PCB screen printing technology, new PCB screen printing materials are used in PCB manufacturing industry.

2021-12-26

Non nickel PCB surface treatment process of Multilayer PCB, The surface treatment process of non electrolytic nickel PCB should complete several functions.

2021-12-26

Troubleshooting of electroless nickel plating process for Multilayer PCB, IPCB is a multilayer PCB manufacturer.

2021-12-26

Electroplating process description and gold plating process description of Multilayer PCB circuit board.

2021-12-26

The fabrication of HDI PCB circuit boards is developing toward layered and multifunctional direction, which makes the development of HDI PCB laser drilling technology.

2021-12-26

Copper clad laminate of multilayer circuit board is the substrate material for making printed circuit board

2021-12-24

Preface, in PCB board​ reflow welding analysis and improvement of burst plate. With the development of electronic products in the direction of multi-function.

2021-12-23

PCB board has become an important and key part of electronic information products.