Precision PCB Fabrication, High-Frequency PCB, High-Speed PCB, Standard PCB, Multilayer PCB and PCB Assembly.
The most reliable PCB & PCBA custom service factory.
PCB Material List

PCB Material List - F4BM-2 & F4BM Radio frequency PCB material

PCB Material List

PCB Material List - F4BM-2 & F4BM Radio frequency PCB material

F4BM-2 & F4BM Radio frequency PCB material

F4BM-2 & F4BM Radio frequency PCB material is laminated by laying up of woven glass fabric, bond film, with Teflon PCB resin and Polytrtrafluoroethylene(PTFE) film, according to the scientific formulation and strict technology process. F4BM-2 takes some advantages over F4B series in the electrical performance (wider range of dielectric constant, lower dielectric loss angle tangent, increased resistance and more stability of performance).


F4BM-2 & F4BM Dielectric Constant: f4bm220(dk 2.20), f4bm255(dk 2.55), f4bm265(dk 2.65), f4bm300(dk 3.0). Support customized dielectric constant.


F4BM-2 Dimension(mm): 300*250, 380*350, 440*550, 500*500, 460*610, 600*500, 840*840, 840*1200, 1500*1000

For special dimension,customized laminates is available.


F4BM-2 PCB material thickness(mm): 0.25, 0.5, 0.8, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0, 12.0

F4BM PTFE PCB

Radio frequency PCB material F4BMTeflon PCB

Teflon is a polymer obtained by polymerization of tetrafluoroethylene monomer. Its molecular structure can be regarded as the replacement of hydrogen atoms in polyethylene by fluorine atoms. Due to the existence of the strong C-F bond, Teflon has many properties that polymer materials lack, such as particularly low temperature resistance, particularly corrosion resistance, particularly difficult to be wetted, high lubrication, non-adhesion and so on. It is an important field in the fluorine chemical industry with rapid development, high technical content and good prospects. It is widely used in petroleum, chemical, electronic appliances, medical, machinery and other fields.

F4BM-2 Teflon PCB

F4BM-2Teflon PCB

The main components of F4BM-2 are teflon and glass fiber, which are made by Chinese PCB material manufacturers, so F4BM-2 has a very good cost performance.

F4BM-2 has been mass-produced and applied in China, such as 3G antenna PCB, 4G antenna PCB and so on.


Related PCB Prototype

F4BM PTFE PCB PTFE F4BM High Frequency Board Teflon F4BM-255 Microwave PCB Board PTFE F4BM-300 RF High Frequency