PCB Tech - PCBA processing of driving recorder control board

PCBA processing of driving recorder control board

1. The overall PCBA solution of the driving recorder control board

2. PCB assembly, PCB/PCBA design, PCBA copy board

3. Customized processing PCBA/OEM/EMS (electronic manufacturing services)

4. SMT&DIP&PTH&BGA assembly

5. Provide component procurement services

6. Fast PCBA proofing

7. X-ray test, internal circuit test (ICT), functional test (FCT)

8. Small and medium batches can be accepted

PCBA manufacturing service for driving recorder control board

Customers provide: PCB documents, PCB process requirements, bill of materials, assembly or soldering technical requirements.

One-stop PCBA service: production of 1-30 layers of PCB, assembly parts/material procurement, SMT production, PCBA testing, PCBA burn-in testing, PCBA packaging, PCBA delivery.

PCBA manufacturing quality of driving recorder control board

1. UL, SGS, TUV, BV, ROHS, ISO9001:2008, TS16949 certification.

2. 4 dust-proof SMT production lines and DIP production lines.

3. Wear anti-static and dust-proof overalls on the whole line.

4. The operator must be strictly trained before he can be approved to a suitable job position.

5. PCBA production equipment: Jikangda solder paste printer, Panasonic MV2-F&JUKI-2050M placement machine, reflow oven, wave soldering machine, artificial intelligence plug-in machine.

6. PCBA test equipment: ORT machine, constant temperature and humidity test box, 3D coordinate measuring instrument, ROHS inspection machine, X-ray inspection.

7. PCBA testing capabilities: ICT (internal circuit testing), FCT (functional circuit testing), BGA X-ray testing.

8. The range of machinable components:

▪ 0201,0402,0603,0805,1206,1608,2125,3216

▪ fine QFP 0.2mm

▪ Flip Chip, BGA, Connector

▪ BGA 0.2mm

9. Each workstation operates in accordance with SOP standard operating procedures.

10. Material: FR-4, FPC, aluminum base, high TG, halogen-free, high frequency, CEM-1, CEM-3, FR-1, 94-VO, etc.;

11. Sheets: Kingboard, Shengyi, Guoji Class A material.

Driving recorder control board PCBA production delivery time

After the OEM contract is signed and the engineering documents are confirmed, the sample delivery time is usually 7-10 working days.

For large-scale production, according to customer needs, it can be delivered in batches, one part at a time.

PCBA processing of driving recorder control board

Supplementary information for PCBA manufacturing of driving recorder control board

1. After the sample is confirmed OK, mass production can be started.

2. The plug-in component can only be positioned once, and the minimum distance between the component and the PCB board will remain unchanged.

3. The positioning holes and grounding holes will be protected by high temperature resistant tape.

4. EPE anti-static packaging is used to prevent impact and other problems.

Driving recorder control board PCBA shipment

standard packaging

Each PCBA board is placed in an anti-static bag, then put in a bubble bag, and finally placed in a specially processed carton.

The above is an introduction about where the PCBA processing of the driving recorder control board can be done